Allows to have a pH / EC always at the right value. Indicates pH/EC values and regulates continuously, for precise water adjustment. Controls automatic filling of tanks, recirculation pump, irrigation pump, water temperature.
Information about the Prosystemaqua Control Plus:
Works with multiple systems: Hydroponics, aeroponics. In the aquarium or for vertical flow.
The pumps can be managed independently: Flow from 0 to 4 L/h.
2 independent irrigation programs: Irrigation pump and water recirculation pump.
It is possible to attach a heating or cooling system, for water temperature control.
Automatic triggering of water filling, using a probe activating the filling solenoid valve.
The controller is held on a methacrylate plate, where the water inlet can be connected, as well as the outlet pipe of the recirculation pump.
The dirt filter helps maintain the accuracy of pH/EC probes.
Controller requires configuration before operation
pH: Enter the desired value in the water container. Program the pH mode in “down or up” mode. Proceed with the calibration. Adjust the proportional flow rate of the Ph pump.
EC: Enter the desired EC value in the water container. Verification of the temperature compensation, as well as the alarm of the schedules and air. Perform calibration . Adjust the proportional flow of pumps A and b.
Water recirculation: Once the water recirculation pump is connected to the controller, program the desired sequences and times.
Irrigation system: Once the irrigation pump is connected to the controller, program the desired sequences and times.
Filling system: The placement of the level probe, is positioned in the water reserve.
Temperature control: After the cooling or heating system is connected with the controller, set the desired water temperature.
pH measurement and conductivity: The probe enables conductivity detection and determines the value, to transmit it to the screen of each pump.
Fertilizer suction and pH regulator: The controllers inject the product into the suction filter, and regulate the pH and EC.
Fertilizer injection: Once the EC and pH values are indicated in the controller, the fertilizer and pH distribution through the manifold injection valves adjusts the values in the water container.