Accessory for Autopot pot, intended to increase the level of oxygen supplied to your plants.
| The AirDome was designed to increase the air volume around the root zone in the pot.
If you are lucky enough to have a source of electricity in your greenhouse, this little additional device can increase your yields by up to 130%.
It is very simple to use once assembled, which takes less than 30 seconds, the AirDome sits at the bottom of the pot.
Then we cover it with substrate and connect the AirDome to an air pump. |
|
From a sizing point of view, provide an air pump of approximately 70 L/h per AirDome. It is possible to use a multi-outlet air pump by connecting each of its outlets to 1 or 2 AirDome depending on the power of the air pump.
Example: For a Hailea ACO9610 Air Pump – 4 Outputs – 600 L/H => Each of the outputs delivers a flow rate of 150 L/h. You can connect it to:
– 4 pots of 15 L or 25 L with a flow rate of 150 L/h by AirDome for each pot
– 8 pots of 8.5 L with a flow rate of 75 L/h by AirDome for each pot
PS: With the use of Autopots, it is also possible to mix 8.5 L pots with 15 L or 25 L pots. This will allow you to adjust the number of AirDome to be supplied depending on the configuration of the pots used.
To maximize the effectiveness of the AirDome, use a quality “fluffy” and “Aerated” substrate, made up of a mixture of 50% good quality absorbent substrate (potting soil, coconut fiber, Rock Wool, etc.) and 50% draining substrate (perlite or clay balls).
Do not use peat moss, as it tends to clump and compress, which will reduce the effectiveness of the AirDome.
Reviews
There are no reviews yet.