Expand Prosystemaqua – Controller Plus – PH & EC -3 Pumps

pH/EC Continuous Flow Controller

Allows to have a pH / EC always at the right value.
Indicates pH/EC values ​​and regulates continuously, for precise water adjustment.
Controls automatic filling of tanks, recirculation pump, irrigation pump, water temperature.

Information about the  Prosystemaqua Control Plus:

• Works with multiple systems: Hydroponics, aeroponics. In the aquarium or for vertical flow.
• The pumps can be managed independently: Flow from 0 to 4 L/h.
• 2 independent irrigation programs: Irrigation pump and water recirculation pump.
• It is possible to attach a heating or cooling system, for water temperature control.
• Automatic triggering of water filling, using a probe activating the filling solenoid valve.
• The controller is held on a methacrylate plate, where the water inlet can be connected, as well as the outlet pipe of the recirculation pump.
• The dirt filter helps maintain the accuracy of pH/EC probes.

Operation:

Controller requires configuration before operation

• pH:
  Enter the desired value in the water container.
  Program the pH mode in “down or up” mode.
  Proceed with the calibration.
  Adjust the proportional flow rate of the Ph pump.
• EC:
  Enter the desired EC value in the water container.
  Verification of the temperature compensation, as well as the alarm of the schedules and air.
  Perform calibration .
  Adjust the proportional flow of pumps A and b.

• Water recirculation:
  Once the water recirculation pump is connected to the controller, program the desired sequences and times.
• Irrigation system:
  Once the  irrigation pump is connected to the controller, program the desired sequences and times.
• Filling system:
  The placement of the level probe, is positioned in the water reserve.
• Temperature control:
  After the cooling or heating system is connected with the controller, set the desired water temperature.

• pH measurement and conductivity: The probe enables conductivity
  detection and determines the value, to transmit it to the screen of each pump.
• Fertilizer suction and pH regulator:
  The controllers inject the product into the suction filter, and regulate the pH and EC.
• Fertilizer injection:
  Once the EC and pH values ​​are indicated in the controller, the fertilizer and pH distribution through the manifold injection valves adjusts the values ​​in the water container.