Lumatek LED Attis 300W Pro
Discover the new ATS Pro 200 and 300W luminaires from Lumatek. The new benchmark in the horticultural lighting industry for their performance and their aesthetic and practical design. The ATS 300W Pro is a lightweight device capable of producing very high light levels. With a PPF of 816 µmol/s and a yield of 2.7 µmol/J ideal on a coverage of 100x100cm.
Lumatek takes advantage of the latest LED advances for a beautiful and reliable luminaire that can cover the entire light spectrum and thus offer you a unique solution for your plants, from the propagation period and from growth to flowering.
ATS Pro becomes the ideal range for any indoor cultivation by creating a uniform diffusion of light even over short distances, thus allowing good penetration of the canopy without hot spots and without excessive heat.
ATS Pro is 100% silent, no fan needed thanks to the innovative heat sink and the use of passive natural convection, resulting in a considerable increase in the life of the luminaire.
News
– The new ATS Pro range benefits from the latest generation of controllable driver ensuring superior LED efficiency.
– Result of a long R&D, the diodes benefit from a better distribution improving the diffusion and the imprint of light.
– New IP65 rating with Clear Glue protective cover technology, light transmission is 99% higher
– Extended diode life and improved corrosion resistance.
Technical characteristics
| Model |
ATS PRO 300W |
| Input voltage: |
200 -240V 50/60Hz |
| Input power: |
310W |
| PPF: |
816 ?mol/s |
| Footprint: |
Up to 100x100cm |
| Protection |
IP65 |
| Efficiency : |
2.7 ?mol/J |
| Dimensions |
559.5×559.5×71.6mm |
| Light source |
Premium quality white, red and far red diodes |
| Weight |
5.2kg |
| Operating temperature : |
-20° up to + 40°C |
| Humidity rate accepted: |
20% to 90% non-condensing |
| Water/dust resistance |
IP65 |
| Beam angle |
120° |
| Spectrum |
Full Spectrum + |
Full Spectrum
External controller
The ATS Pro range can be controlled with the Lumatek digital lighting controller (Digital Panel Plus 2.0) with lighting synchronization, automated dimming (1% increment), safe temperature control, sunrise and sunset mode and up to 100 devices per controller.
You can also use a universal control system using a 0-10V output signal by using an RJ signal converter to a 0-10V control adapter if necessary.
Composition
- 1 x ATS300W Pro LED with Driver
- 1 x 230V power cable
- 1 x 0-10V Light Dimmer + grip tape
- 2 x Metal suspension cable
- 1x Manual
Reviews
There are no reviews yet.